Membrane Performance Chemicals-104

Instructions for Use

Important: Always wear appropriate protective gear, including gloves and safety goggles, when handling this product.

1. Preparation: Ensure the RO system is properly shut down and isolated.
2. Cleaning Solution Preparation: Prepare the cleaning solution by diluting Bluewello Membrane Cleaning Solution 104 with water according to the manufacturer’s recommendations. The exact dilution ratio depends on the severity of scaling and membrane type.
3. Circulation: Circulate the cleaning solution through the RO system at a low flow rate for the recommended time.
4. Rinsing: Thoroughly rinse the system with clean water to remove all cleaning solution residues.
5. Restart: Once the system is completely rinsed, restart the RO system and monitor performance.

Note: For severe scaling, multiple cleaning cycles may be required. Always follow the specific instructions provided by the manufacturer.

Safety Precautions

• Harmful if swallowed.
• Causes skin irritation.
• Causes serious eye irritation.
• Wear protective gloves/protective clothing/eye protection/face protection.  
• IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
• IF ON SKIN: Wash with plenty of water.  
• IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.  
• IF SKIN IRRITATION OCCURS: Get medical advice/attention.  

Storage and Handling

• Store in a cool, dry place away from direct sunlight.
• Keep container tightly closed when not in use.
• Avoid freezing and excessive heat.
• Handle with care, wearing appropriate protective gear.
• Keep out of reach of children and pets.

Note: This product is for industrial use only. Follow all local, state, and federal regulations regarding handling, storage, and disposal.

Available Packings:

• 5 Liter
• 10 Liter
• 35 Liter Carboy

Disclaimer: While Bluewello Membrane Cleaning Solution 104 is effective in removing scale, it is essential to follow proper RO system maintenance procedures and consult the manufacturer’s guidelines.